Snap & Button

Question1 What is the best foundation when attaching snap fasteners?
Answer1 The best foundation is two plies of fabric plus one ply of interlining. Answer1
Question2 Why do we need interlining sewn to fabric when attaching snap fasteners?
Answer2 Answer2If the interlining is not sewn to the base fabric, the fabric around the snap fasteners may tear after some ON/OFF actions. Make sure that the interlining and fabric are stitched together, especially on the back placket.
Question3 Can snap fasteners be attached on uneven thickness?
Answer3 Attachment on uneven thickness may result in snap fasteners detachment, weak ON/OFF actions, or fabric tearing. Where there exist significant uneven thickness, snaps can not be attached.
Question4 How can I avoid snap fasteners turning around after attachment on thin fabric?
Answer4 Answer4Snap fasteners may turn around if the fabric is too thin at the attaching point. Packing is required in this case.
Question5 How can I check that snap fasteners attached will not come off easily?
Answer5 Answer5Try to pluck if off with your fingertip or nail. Make it your routine at the beginning of the day's work.
Question6 How can I avoid fabric tear during snap fastener attachment?
Answer6 Answer6Make sure to attach inside the stitch line.
Question7 Is it okay to iron snap fasteners?
Answer7 Do not iron directly on snap fasteners. It may cause scratch or deformation on the metallic snaps, and breakage or distortion on the plastic snaps. Place a cloth over the snap fasteners before ironing on them.
Question8 Is it okay to high-impact press on the snap fasteners?
Answer8 Problems such as deformation, breakage, stiff or lost ON/OFF actions may occur if the pressure is too strong.
Question9 Is it okay to put snap fasteners in high-temperature drying?
Answer9 Plastic snaps, under high temperature, are less resistant to deformation, discoloration, and scratch.
Question10 What is a needle detector?
Answer10 A Needle Detector is a peace of equipment which has a sensitivity to ferromagnetic substances, thereby detecting broken needle chips or other undesirable objects inadvertently contained in the garments. Needle-Detector proof accessories are made to be irresponsive to the sensor of the equipment, so that the intended detection can be executed without unnecessary confusion between the undesirable objects and the harmless objects.
Question11 How should I place garments on the conveyer belt when using the Needle Detector?
Answer11 Accessories on the garment are positioned to enter the gate one at a time.
Answer11
Question12 How do I clean the Needle Detector?
Answer12 Keep the belt surface clean at all times. Dust or stains may cause the equipment to malfunction.
Question13 Is there a recommended pull-test machine?
Answer13 Answer13SafQ Snap Tester is recommended. It is used to determine the holding or breaking strength of prong-ring attached snap fasteners on garments. It consists of an Upper Snap Clamp, a Lower Fabric Clamp & Force Gauge mounted on a Stand. The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the Top Flywheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded. Capability can be enhanced with clamps & accessories for testing of other Snaps, Jeans Buttons, Four Hole Buttons & Garment Accessories such as Zippers, Bows, Applique, Toggles, Hooks/Bars, and D-Rings, among others. Contact SDL Atlas Ltd. for more details: http://www.sdlatlas.com/Contact-Us