YKK's water repellent zipper type for the AquaGuard® series, is a polyurethane laminated tape on a VISLON® zipper.
The new element design provides enhanced water resistance while increasing the number of design and color options for your application.
Shiny and Matte effect type had added.
|Size/ Chain Type||3VT8||OK||OK||-||-|
T9 Matte Colored film
T10 Matte Transparent
T810/T108 Shiny and Matte
Combination pattern image
※COMBI-1 and COMBI-2 are available in VT8/9/10.
※COMBI-3 is available in VT9 of size #3, #5 and #8.
The color of tape, film and the element can all be different so the zipper can be a combination of 3 colors as the attached picture below.
New Bottom Stop
New product line up had been added "Interlocking bottom stop " .
＃5 is only available.
Care Information / Remarks
This zipper is water repellent, not waterproof/watertight.
Do not use the curve application since slider may cut the tape.
Avoid applications where PU zippers will come into contact with "vinyl," such as PVC or PU.
[End Use Instruction]
Avoid prolonged exposure to heat and humidity and keep the zipper away from direct sunlight. UV may cause yellowing of the PU film.
Minimal degradation may occur, but this will not effect the performance of the film.
Repeated bending of the zipper may cause cloudy film.
Tumble Dry, Normal, Low Heat.
Petroleum based solvent is recommended. Do not use Chlorine based solvent.
Avoid ironing. It may flatten the film and cause the film to melt.
Related Items (Link to Products Page) more
YKK cannot guarantee that a product is suitable for a particular application therefore you should always conduct your own tests. Please contact a YKK representative for details if you have any questions and concerns.